VL1500 Nozzle Kit

Note: The above picture is missing the driver tool in it that would be included with this kit.

These nozzles were originally researched and developed to ensure longevity and durability by Motorcyclecarbs.com. They have been tested with the cooperation of a hand full or Suzuki VL1500LC (Intruder) owners.

The original long wearing answer to the accelerated wearing of the Suzuki VL1500LC needle jets.

We use GENUINE MIKUNI Jet Needles in these kits.

Nozzle Kits (Needle Jet):

Suzuki VL1500 Intruder Needle Jet Replacement. These bikes start loosing mileage by up to 25% and the fix is new carb bodies as the Jet/Nozzle gets worn and is not available. We are making the replacement part and kit.

• Suzuki VL1500 LC Nozzle replacement kits include.
  • Detailed Instruction sheet.
  • Needle jet removal and installation tool kit.
  • 2 OEM Mikuni jet needles.
  • 2 Replacement needle jets.
  • 2 Replacement top cover air passage O-rings for your convenience. (They are easy to loose).
  • 4 Jet Needle shims for your convenience.
• Replacement Nozzles (click here)
  • We have been asked to offer nozzles individually to previous customers for the purposes of:
    • Mis-installation
    • Wear (you should expect 30,000 out of these nozzles if you use the oringinal OEM needles

Notes:

1. NEVER use any needle other than OEM if you want to get the most life out of your needle jets.
2. Some customers occasionally email us about performance after installation of our Nozzle kits, or jet kits. To avoid further confusion check the following before contacting us.

• Front Cylinder/Rt when sitting on bike
  • Main; Larger of the 2
  • Needle; 5D95
  • Shims; 2 with nozzle kit, 1 without.
• Rear Cylinder/Lt when sitting on bike
  • Main; Smaller of the 2
  • Needle; 5E09
  • Shims; 2 with nozzle kit, 1 without.